HANNON ELECTRIC COMPANY (Main Office & Factory) - Canton, Ohio
With over 85 years of continuous service, we are one of the largest machine shops in the electro-mechanical field, and we are a 24/7 operation with a fleet of trucks (through 30 ton capacity) for pickup and delivery. Our service trucks are equipped with over $100K of tools and meters for use in providing quality service. EASA Member since 1936. UL Certified.

Main Office Entry - Canton, Ohio Main Office Aerial View Main Office






   
GENERAL INFORMATION
 
SERVICES OFFERED
 
AUTHORIZED SALES & SERVICE FOR:
   

Hannon Electric Company
(Main Office & Factory)
1605 Waynesburg Drive S.E.
Canton, Ohio 44707
Phone: (330) 456-4728
Fax: (330) 456-3323

President & Factory Mgr.:
Tom McAllister

Open 24/7!!!

> Directions to Canton Facility
> E-mail Contact for this Facility
> Video Tour for this Facility

 

- Electric Motor Repair Capabilities
- Large Machining Capabilities
- In-house Coil Manufacturing
- Complete Electro-Mechanical Repair Services
- Systems and Drives (Sales & Service)
- Field Service
- New and Re-manufactured Equipment
- Servo Motor Repair
- Centrifugal Blower Repair
- Complete Equipment Resources
- Dry Type Transfomers

 

- Centrifugal Blowers
- Gardner-Denver Blowers
- Emerson US Motors
- Siemens Motors
- Lincoln Motors
- Acme Transformers
- Olsun Transformers
- Hoffman Blowers
- Lamson Blowers
- Leeson Motors
- Baldor/Reliance Motors
- A.O. Smith Motors
- Teco-Westinghouse Motors
- Toshiba Motors
- Hyundai Motors
- MGM Transformers
- AC & DC Drives: Yaskawa & Benshaw

   
SHOP CAPABILITIES
   

- Total Square Feet: 165,000
- Lifting through 200 ton lifting capacity.
- Bridge Cranes: 2-50 ton cranes, 3-20 ton, 2-10 ton, 1-5 ton, 12-1 ton jib
- Portable lifting equipment to 100 tons.
- Computer controlled vacuum pressure impregnation system (VPI): 94" diameter, 96" deep and 120" long shaft.
- Computer dynamic balancers
- Laser alignment
- Coil winders

- Electronic balancer (in shop & in field) - In-Shop capability is 50,000lb capacity.
- Computer controlled test stands through 13,800 volt
- High Voltage Portable Test Instruments up to 1,000,000V
- Complete Metrology laboratory w/ 4' x 6' granite surface plate
- Engine Lathes: 130" X 27'; 96" X 22'; 48" X 120"; 40" X 120"; 35" X 120"; 35" X 120"; 27" X 96"; 24" X 96"; 17" X 54"; 6" X 72"; 45"(35") x 156"; 36"(26") x 204"; 36" x 144"; 12" x 54"
- Mills: #4 horizontal, #3 horizontal, #3 vertical Bridgeport, Elgamill CS 10 milling and boring machine (22' long X 48" wide table vertical travel 67" longitudinal travel 169")
- Drills: (4) spindle, single spindle, and radial, optical.
- Grinders: 6' X 18" surface, 12" X 36" universal up to 10 HP tool post.
- Saws: Horizontal metal band vertical, do all vertical band, power saws.
- Welders: CO electric, argon electric, 400 amp DC, 400 amp AC mig and tig welding.
- Presses: 600 ton horizontal, 50 ton horizontal, 300 ton vertical, 100 ton portable
- Dynamometers: Three dynamometers 1HP through 2,250HP
- Portable drive units.
- PdMA tester with MCE Gold software
- DLI Vibration Analyzer

- Integrated Process Management System: Includes standards, ongoing tracking and continuous improvements
- Miscellaneous: Automatic torch cutters, hydraulic tracers, 35,000 LB dynamic balancers, portable dynamic balancers, sandblast cabinets, steam and solvent cleaners, paint spray booth, versa mill, buffalo iron worker, shapers, profilometer, oil tester, bar to bar tester, hi-pot tester, hardness tester magnetic particle inspection, stress gauges, solventless varnish treaters, charring ovens, baking ovens, dynamometer testing, rebabbitting to include centrifugal and pour casting.
- Equipped service vehicles.

TESTING CAPABILITIES

2250 HP Dynamometer
- 8888 ft. lbs. torque
- 3600 RPM

2100 KVA Motor Test Stand
AC Ratings

- 120 VAC @ 2760 Amps
- 400 VAC @ 2500 Amps
- 600 VAC @ 2000 Amps
- 1200 VAC @ 1000 Amps
- 2300 VAC @ 522 Amps
- 3300 VAC @ 364 Amps
- 4160 VAC @ 289 Amps
- 7200 VAC @ 167 Amps
- 13800 VAC @ 87 Amps
DC Ratings
- 6000 VDC @ 2500 Amps
- 800 VDC @ 2000 Amps
- 1000 VAC @ 1600 Amps

Advanced Computerized Recording & Charting
- Motor Voltages & Current
- Tri-Axial Bearing Vibration
- Bearing Temperatures
- Rix Winding Temperatures
- Motor Power KW, KVA & Power Factor
- Dynamometer HP, RPM, & Torque

   
   
Small Motors
Bull Gear (113" dia) & Drive Shaft
Rebuilt Titanium Crusher
8400HP Allis Chalmers; 360RPM; 660V, 60,000lbs.
Rebabbit and Machine Bearing
   
Allis Chalmers 8400HP, 360RPM, 60,000lbs - Rotor
New 50 Ton Capacity Crane
130 Ton Complete Motor
130 Ton Complete Motor
Load Test Panel
67 Tom Arm Lift to Crane
Arm Loaded in Lathe for 67 Ton
Arm in Lathe for 67 Ton
   
A look into one of our fleet of service vans
Service truck utilizing its 2500# capacity gate lift Service truck utilizing its 2500# capacity gate lift   Dynamometer
Test Panel
     
   
AREA MAP

Click on image for direct link to MapQuest.
Courtesy of MapQuest.com

© 2008 The Hannon Company / Hannon Electric. All Rights Reserved